Toy Story Inspired Iron On Patches

You’ve definitely got a friend in these patches. These iron on Disney’s toy story patches are the perfect addition to any themed jacket or bag. The perfect addition to your Disney attire. These patches are Iron on but we always reccomend adding fabric glue or a few stitches for a more permanent hold. With fabrics such as nylon we personally recommend gluing or sewing the patch. If you choose to glue on the patch to adhere the patch more permanently we recommend E-6000 industrial glue and you can purchase it from our shop: https://www.etsy.com/listing/1431616406 Iron-on instructions: 1) Set your iron to medium-high/high setting. 2) Lay your garment down on a surface that is heat tolerant. 3) place patch where you would like it to be 4) Cover the patch with a white/light colored fabric such as an old t-shirt or pillow case. 5) With the iron, apply firm pressure for about 30 seconds. Please be careful not to apply direct heat to the glitter portion of patch. Let it cool off and lift the fabric that is covering the patch and check to see if the patch has started adhering. If not, cover the patch with the fabric again, and place the iron over it again and apply firm pressure for about 30 seconds, let it cool off and re-check to see if patch is adhering. The chenille may be flatter now after you put the hot iron over it, while it is still warm, you can use a brush to gently brush it for it to look full again. 6) Turn your garment inside out and then apply firm pressure to the back of the patch for about 30 seconds. You do not need to cover the garment with a piece of fabric/paper towel on this side. 7) Let it cool off and then check if the patch is fully adhered to your garment. If not, please repeat steps 4-6. This listing is for one single patch! If you want to order the set we highly encourage you to do so! Due to the vulnerability of heat pressing The Mismatched Patch will not be responsible for any damaged products or patches. If you have any questions feel free to reach out! Dimensions: Woody: 3.5”x1.5” Buzz: 3.2”x3.6” Jessie: 3.45”x1.4” Bullseye: 3”x2.1” Rex: 3”x3” Pizza planet: 2.75”x2” Pizza Saturn: 2.7”x1.4” Pixar Ball: 2.35”x2.35” Toy Story Logo: 2.6”x1.7” Slinky dog: 2.2” W x 2.5” H