Thastilia Shadeborn the Necromancer / Tabletop Model / Miniature Figurine | Archvillain Games

The size of this model is suitable for 32mm Tabletop gaming using 1 inch grids. Model comes not assembled with base, body, and all associate parts. Model comes bare with no painting so you may customize the miniature as you desire. If the desired size is not offered a custom order can be made with the desired. Such custom order will need to be discussed first. Each model is printed with non toxic, durable, resin at 35 microns of thickness for maximum high definition, properly cleaned with high strength alcohol, and cured with controlled UV light curing. Please allow up to three days for most orders to be printed, cleaned, and packaged. Due to the nature of 3d printing small surface defects are possible, but all efforts will go into minimizing these. In most cases any remaining artifacts can be removed with tweezers or a hobby knife. Models are printed in a resin that has been thoroughly torture tested, surviving 60 inch drops to a hard surface and taking only small damage from 60 inch drop to tile! Hopefully something you wont need to reproduce. Replacement parts can be ordered separately. If damaged in transit will be replaced ASAP with no additional cost with photo evidence of damage. As is the nature of 3D Printing there may be some pockmarking or slight defects but all models are screened before shipment to reduce this chance. This model was designed by the artists of Archvillain Games and is licensed to Missing Link Productions for Commercial Printing and Selling.