Halloween Patch,Witch Hat Embroidery Patch,Witch Hair Accessories,Iron on Patch

Size: Shown as picture Backing: Iron On Instructions: 1.Place the patch on the desired location with the adhesive side facing the fabric (do not remove the adhesive backing). Preheat an iron and iron the front of the patch for 10-20 seconds to secure it in place. You can also use a needle and thread to temporarily secure the patch before ironing to prevent it from shifting. 2.Turn the fabric (or other textile) with the securely positioned patch over, and iron the back for 30-60 seconds to ensure that the adhesive melts and the patch firmly adheres to the fabric. 3.Finally, iron the front of the patch for 1-2 minutes, focusing on the edges and corners, to ensure a smooth and seamless integration with the fabric (or other textile). Note: For patches with sequins, beads, rhinestones, silk flowers, or pom-poms, as well as patches embroidered with metallic thread, it is advisable to iron them from the back first. After firmly securing the patch, then iron the front to tidy up the edges and corners to avoid damaging the embellishments. Ensure that the fabric (or other textile) is dry, and do not use steam while ironing the patch or the fabric. Once the patch is properly ironed, it should stay securely attached to the fabric (or other textile) for an extended period. If the patch starts to come off after some time or washing, it indicates that the iron temperature was too low or the ironing time was too short.