Forest Antler fantasy cosplay horns with comfort fit headband

Made from real ultra-light wood fibre and carbon fibre, these fully adjustable horns have a natural horn-wood texture with a matte black finish. They are sturdy but very lightweight, so you can wear them comfortably all day at conventions, LARP events or photoshoots. Pre-painted and ready to wear, they add instant presence to any tiefling, faun, demon, devil or woodland fey look. Each pair can be worn on the included Headband V7 (two in every box) or applied directly to skin with a cosmetic adhesive. You can thread the supplied elastic, or your own cord, through the back slots of the headband to secure around the back of your head for extra support, so the horns stay put even during heavy movement. Every set is 3D printed and hand-painted in-house at RunestonePrints. No obvious seams and very soft layer lines give a clean, film-ready quality, while the matte black coat and exposed wood accents keep them looking organic rather than plastic. Keep PLA away from temperatures above 60°C to prevent warping. ===== Included ===== • 2 horns, left and right • 2 universal comfort Headband V7s (fits most adults, strong yet flexible, wig friendly) • Elastic cord for extra security • 4 screws - 2 installed, 2 spare, sitting flush in the headband so they cannot be felt in wear • 2 toothed locking washers (one for each horn) ===== Headband Details ===== Headband V7 is printed in strong PETG and built to last. It has 17 mounting holes so you can slide and swivel each horn to the exact angle and spacing you want. A central top hole can take extra pieces such as carapace plates, crowns or unicorn horns. Thread elastic or cord through the end slots and around the back of your head if you want extra security at the nape of the neck. If you prefer a band-free look, you can use spirit gum or another skin-safe adhesive on each base instead. The bases are sculpted to a gentle head curve so they sit comfortably against your head or wig. ===== Size ===== Length (straight line): 25 cm Weight (pair): ~75g ===== Custom Options ===== If you would like them shorter, longer or tipped with a colour highlight, send me a message before checkout so I can create a custom listing. Pricing varies with size and paint time. I can also print the bases flat and smooth with no screw recess if you prefer to glue them directly to a headpiece or prosthetic. If you have a specific deadline or event date, tell me and I can prioritise your order or arrange faster shipping. ===== Material ===== Printed in plant-based PLA wood filament and/or carbon fibre PLA, then primed, painted and sealed unless you request otherwise. Headband V7 is printed in impact-resistant PETG for strength and longevity. Each pair of horns and headbands is packaged securely in a recycled plain box with shredded recycled card to protect the details for both domestic and international shipping. No plastic packaging. ===== Tools Needed ===== Small or medium Phillips head screwdriver. ===== Care and Safety ===== Contains small hardware. Keep away from young children. After using skin adhesive, lightly sand the horn bases to remove residue before the next wear. ===== Tag Us ===== Show off your cosplay on Instagram: @runestoneprints. I enjoy seeing what people create with these. If you have any questions or custom requests, you can message me any time. Smaller, larger or lighter versions are not a problem. ===== Screw Assembly and Fit Advice ===== To maximise longevity, the guide holes in the bases and headband are a snug fit. The included self-tapping pointed screws bite into the plastic easily with any standard screwdriver. The supplied toothed locking washers sit between each horn base and the headband. As you tighten the screw, the teeth bite into both surfaces and lock the horn in the rotation you choose. This prevents any swivelling, even during heavy movement, dancing or LARP combat, without needing any glue at all. Use the supplied elastic threaded through the end loops of Headband V7 and around the back of your head to keep the horns comfortably and firmly in place for long wear.Each horn only requires one screw, the extra holes are just for choices The foam can be cut with scissors and stuck onto any part of the base or headbands if you need any extra comfort, always nice to have the option, it is self adhesive. The little washers wedge between the base of the horn and the top of the headband, it keeps them from swivelling when the screw is tightened and you move around a lot. Screw in from the bottom of the headband into the base of any hole in the horn, through the washer. The string can go through the holes in the lowest parts of the headband (you only need one headband, the others are spare) And ties around the back of your head. So it should be customizable, comfortable and secure.