Superhero Cartoon DTF Transfer Ready To Press Funny Characters Iron On Print Retro Comic Style Shirt Design

This listing is for a direct to film transfer – read full details before ordering. Designs are proportionally sized by the longest side. These measurements are an estimate and might vary slightly. This measurement will be for the widest part of the image. For example if a design longer by the hight the transfer size will apply by hight. If a design longer by the weight the transfer size will apply by weight. DTF Transfer Application Instructions: -Preheat the garment for 15 seconds to remove excess moisture. Let the garment cool before adding the transfer. -Place the transfer on the shirt white side down, image facing up. -Press at 325F for 15 seconds under very firm pressure. -Remove the garment from the press and let it stand until it is cold enough to peel. -Peel cool. -Cover the image with parchment paper and press again for 15 seconds. You can use a Teflon sheet, butcher paper. ***Please note: If the image does not come off completely, repress with the image in place, let it cool, and re-peel the film. These can only be applied using a heat press that can apply 60PSI of pressure. Care Instructions: Turn the garment inside out. Machine wash cold. No bleach. No softener. Do not dry clean or iron. Tumble dry low. Do not iron it directly on the design. Keep in mind that the specific instructions and steps for a direct-to-film transfer may vary depending on the equipment and materials used.